VM600 MPC4 Machinery Protection Card | Mk1 Phase-Out, Specs, Upgrade Solution & Limited In-Stock Parts

1. VM600 MPC4 End-of-Life Overview

The VM600 MPC4 Mk1 is closed for new orders and fully phased out under the manufacturer’s end-of-life policy, with key lifecycle updates as follows:

- Official spare support until 2027 – No factory replenishment after this cutoff

- VM600 Mk1 racks – No direct one-to-one replacement for MPC4 Mk1

- VM600 Mk2 upgrade path – Official replacement package: MPC4 Mk2 + IOC4 Mk2

As the 2027 support cutoff draws near, stocking genuine obsolete VM600 Mk1 spare parts is the most effective way to sustain stable operation and prevent costly unplanned shutdowns for legacy monitoring systems.

2. MPC4 Key Specifications & System Requirements

The VM600 MPC4 is a SIL2-certified high-reliability machinery protection module, fully compatible with ABE040, ABE042 and ABE056 series racks. This card requires a mandatory pairing with the IOC4T I/O card and supports full configuration and operation via the official VM600 MPSx software.

• Channels: 4 dynamic vibration channels + 2 tachometer speed channels (fully configurable)
• Outputs: 2 processed outputs per dynamic channel, 1 output per tacho channel
• Integrated functions: Sensor power supply, buffered/DC outputs, relay interlocks, serial communication
• Measurement coverage: Relative vibration, absolute vibration and all standard machinery protection parameters

3. VM600 Mk1 Obsolete Supporting Modules

Nearly all original VM600 Mk1 auxiliary modules are discontinued with extremely limited factory stock, creating common maintenance and spare parts procurement challenges for legacy industrial sites:

- IRC4: Fully discontinued, no replacement (critical 2oo3 relay voting logic)

- CPUR / CPUR2: Obsolete rack controllers; Mk2 alternative: CPUM Mk2 + IOCN Mk2

- IOC4T: Discontinued matched I/O and coupling module for MPC4

4. Limited Genuine In-Stock VM600 Spare Parts

To support emergency equipment repairs and routine spare part inventory planning for global VM600 Mk1 users, we maintain limited genuine new old stock (NOS) of core obsolete modules. All listed parts are 100% original with fast worldwide shipping, and no restock will be available once sold out due to official production discontinuation.

In-Stock Part List

• VM600 MPC4: 200-510-070-113, 200-510-071-113, 200-510-041-021, 200-510-111-021, 200-510-111-034
• IOC4T: 200-560-000-111, 200-560-000-016, 200-560-101-015, 200-560-000-013, 200-560-101-017, 200-560-000-018
• IOCN: 200-566-000-012, 200-566-101-012
• CPUM: 200-595-031-111, 200-595-100-014, 200-595-072-122
• XMV16: 600-003, 620-001-001-116
• XIO16T: 620-002-000-113, 620-003-111-112
• IOCT16T / CMC16: 200-565-000-013, 200-530-025-014
• ABE040 Rack: 204-040-100-011
• IQS450: 204-450-000-002

5. Maintenance & Upgrade Recommendations

For legacy VM600 Mk1 sites: Conduct a full inventory audit of on-site MPC4, IOC4T and other critical modules. Stock up on key obsolete spare parts before the 2027 factory support termination to eliminate unplanned shutdown risks.

For new projects & system retrofits: Adopt the upgraded VM600 Mk2 solution with MPC4 Mk2 + IOC4 Mk2 modules, which features long-term factory supply, optimized firmware performance and stable redundant system support.

We provide one-stop technical support including official datasheet downloads, system configuration guidance, on-site fault diagnosis and customized VM600 system retrofit solutions for global industrial clients.

6. Conclusion

The VM600 MPC4 Mk1 will officially terminate factory technical support and spare part services in 2027, leaving a limited time window for legacy system users to complete spare part reserve and system upgrading. Our stock of genuine obsolete VM600 modules provides a reliable interim solution for emergency maintenance and long-term equipment stability, supporting smooth system modernization for industrial rotating machinery.